Load Cell Simulator
 |
XY1 load cell simulator adopts high precision DA converter, able to simulate various output signals from strain gauge load cells of weighing, pressing, ergometering, accumulation and so on. Output range of the simulator is from 0~2.0000mV/V and non-linearity is <0.005%FS. It's widely applied to verify and check weighing indicator and so on alike measuring instrument connected to strain gauge load cell.: |
Standard Features:
 |
Able to simulate standard output signal from strain gauge load cell of weighing, pressing |
|
Able to set display segment of decrease or increase(F0 mode) |
|
Able to set display segment of decrease or increase(F0 mode) |
|
Able to output signal in accordance with value set by key (F1 mode) |
|
Able to output signal grade by grade in accordance with set range(F2 mode) |
|
Able to detect environment temperature |
|
Able to measure excitation of the indicator measured |
|
Able to program by key |
|
Able to execute user defined program, output signal in accordance with program, simulate the working procedure of auto weighing instrument |
Specifications
| Non-linearity: | 0.005%F.S |
| Output precision at FS: | 0.01%F.S(25) |
| Excitation power range: | DC 5~10V;10~20V |
| Output range: | :0~2mV/V |
| Outer resolution: | :0.0001mV/V |
| Inner resolution: | 60,000 code |
| Working temperature range: | 0~40 |
| Stability: | 50ppm/month |
| Input excitation currency: | Excitation(V)/700(ohm)+5mA |
| Output resistance: | about 360 ohm |
| Size: | 145*85*30 mm |